National Instruments - SCC-RLY01

Below are all the different types of National Instruments. Select the device of your choice, to download the manual

Contents

USER GUIDE SCC RLY01 Relay Module The SCC RLYOl contains one single pole double throw SPDT nonlatching relay capable of switching 5 A at 30 VDC when using an SC 2345 or SC 2350 or 250 VAC when using an SCC 68 Any single E M Series DAQ device digital input output P0 line 0 to 7 can control the SCC RLYOl The SCC RLYOl uses positive logic A digital high sets the relay and a digital low resets it In the set state the common COM contact is connected to the normally open NO contact In the reset state the common COM contact is connected to the normally closed NC contact Conventions lt gt A A The following conventions are used in this guide Angle brackets that contain numbers separated by an ellipsis represent a range of values as ...